Auto AC Conditioning Compressor For Renault Koleos 926002216R 92600JY11A DKS17 92610JM01C

Auto AC Conditioning Compressor For Renault Koleos 926002216R 92600JY11A DKS17 92610JM01C

The core conclusion: The key to maintaining automotive air conditioning compressors lies in keeping them clean, maintaining stable operating conditions and using them in a standardized manner, which can significantly extend their service life.

1. Air conditioning system cleaning and maintenance

Replace the air conditioning filter element regularly. It is recommended to do so every 10,000 kilometers or every six months to prevent dust and impurities from entering the compressor.
Clean the surface of the condenser and gently rinse the heat sink with a high-pressure water gun to remove obstacles such as mosquitoes and sand, ensuring the heat dissipation efficiency.
Regularly clean the evaporator to reduce the accumulation of dirt inside and prevent the compressor from overloading due to increased system resistance.

2. Maintenance of refrigerants and refrigeration oil

Add the appropriate type of refrigerant as required in the vehicle manual to avoid mixing or adding too much or too little.
Make sure there is an adequate amount of refrigeration oil and the type is matched. It can lubricate the internal components of the compressor. A lack of it will cause severe wear.
Check the sealing of the refrigeration system once a year to prevent refrigerant leakage, as leakage can cause the compressor to run dry and get damaged.

3. Use air conditioners in a standardized manner

After starting the vehicle, wait for the engine to idle stably before turning on the air conditioner to avoid directly turning on the air conditioner during cold starts, which may increase the load on the compressor.
Avoid driving in the maximum cooling mode for a long time. When the temperature is suitable, switch to medium or low gears to reduce the continuous high-load operation of the compressor.
Before parking, turn off the AC key 3 to 5 minutes in advance to keep the blower running, expel the residual cold air in the evaporator and protect the compressor.

4. Regular comprehensive inspections

A comprehensive inspection of the air conditioning system should be conducted every two years, including the tension of the compressor belt and the condition of the bearings, etc.
Pay attention to the working condition of the compressor. If there is any abnormal noise, vibration or a decline in cooling effect, troubleshoot the fault in time.

To avoid immediately turning on the strong cooling function after the vehicle has been exposed to the sun for a long time, you can first open the Windows for ventilation and cooling down, and then start the air conditioner.